Number of posts : 255 Age : 39 Location : P.Pines Registration date : 2010-10-07
Subject: Re: Rage Tek Dyno Day July 20th 2012, 6:13 pm
Posting up to help out a local shop here in Davie.
whoismikeford414 Newbie
Number of posts : 32 Registration date : 2011-09-17
Subject: Re: Rage Tek Dyno Day July 20th 2012, 8:05 pm
Called the guy, dyno jet dyno, will read SAE or STD whichever you prefer with A/F ratio
spooledcrxb18 Newbie
Number of posts : 33 Registration date : 2012-05-27
Subject: Re: Rage Tek Dyno Day July 21st 2012, 5:57 pm
Hey I know that place....lol
Everyone welcome to swing by and strap it down!!!
whoismikeford414 Newbie
Number of posts : 32 Registration date : 2011-09-17
Subject: Re: Rage Tek Dyno Day July 22nd 2012, 3:07 am
You can't really beat 2 pulls for 30 bucks unless u know somebody! Good way to gauge ur cars progress, let's take over this dyno day and make it an SK dyno day!!! Good business for the shop good time for us, compare sheets and make some call outs out of it! I'll be there hopefully I can make 415 to the floor -_-
spooledcrxb18 Newbie
Number of posts : 33 Registration date : 2012-05-27
Subject: Re: Rage Tek Dyno Day July 22nd 2012, 10:42 am
For sure...would love to meet more of the SK family and see some races locked up...we might even have a couple hoopties thatll do some runs!
peacockpirate Intermidate Street Racer
Number of posts : 255 Age : 39 Location : P.Pines Registration date : 2010-10-07
Subject: Re: Rage Tek Dyno Day July 27th 2012, 12:56 pm
bump this is tonight. keys suppose to be running factory freak at too.
CRUSH Admin
Number of posts : 3512 Location : ON A STREET NEAR YOU Registration date : 2009-01-30
Subject: Re: Rage Tek Dyno Day July 27th 2012, 3:05 pm
good dyno i tuned my corvette there with jermy formato
peacockpirate Intermidate Street Racer
Number of posts : 255 Age : 39 Location : P.Pines Registration date : 2010-10-07
Subject: Re: Rage Tek Dyno Day July 27th 2012, 3:48 pm
BABY CRUSH wrote:
good dyno i tuned my corvette there with jermy formato
Yeah jermey comes by a lot.
whoismikeford414 Newbie
Number of posts : 32 Registration date : 2011-09-17
Subject: Re: Rage Tek Dyno Day July 28th 2012, 2:18 pm
The lowest reading dyno around, they call it the heartbreaker lol, wish I woulda known
CRUSH Admin
Number of posts : 3512 Location : ON A STREET NEAR YOU Registration date : 2009-01-30
Subject: Re: Rage Tek Dyno Day July 28th 2012, 2:31 pm
whoismikeford414 wrote:
The lowest reading dyno around, they call it the heartbreaker lol, wish I woulda known
i made 700whp on my vette there and 720whp on an other dyno i think the numbers on rage tek dyno are pretty close at least when i went. how much u put down?
whoismikeford414 Newbie
Number of posts : 32 Registration date : 2011-09-17
Subject: Re: Rage Tek Dyno Day July 28th 2012, 2:40 pm
433, was expect 445 so it's not terrible, I just gotta go back to the bbr dyno where I originally went to before the manifold
V6Chris STREET LEGEND
Number of posts : 5188 Age : 35 Location : In front of you Registration date : 2009-01-30
Subject: Re: Rage Tek Dyno Day July 28th 2012, 3:13 pm
dont even sweat those numbers. Ive seen a dozen 5.0s with bolt ons. your dyno is almost the highest ive seen if those are your numbers.
xpipe, intake, tune and boss intake they avg 408-430whp all the time on the dyno. depends on the trans
CRUSH Admin
Number of posts : 3512 Location : ON A STREET NEAR YOU Registration date : 2009-01-30
Subject: Re: Rage Tek Dyno Day July 28th 2012, 3:32 pm
whoismikeford414 wrote:
433, was expect 445 so it's not terrible, I just gotta go back to the bbr dyno where I originally went to before the manifold
Good numbers. Yeah you should stick to one dyno or you'll go crazy
Phantom SRT4 STREET KING
Number of posts : 2395 Age : 33 Registration date : 2009-02-14
Subject: Re: Rage Tek Dyno Day July 28th 2012, 6:08 pm
Seems like good numbers for the mods, especially on that dyno... BTW, I was the one talking to you about getting one... Everyone thought you had a cam lol
Phantom SRT4 STREET KING
Number of posts : 2395 Age : 33 Registration date : 2009-02-14
Subject: Re: Rage Tek Dyno Day July 28th 2012, 6:25 pm
Heres the vids I got from last night...
My buddies 5.9 Cummins
And my boys SC/E85 LS1 C5 vs 600+whp Turbo B series... 50-150ish
Fly by view thanks to Adrian, blk05srt...
Had a few more runs setup but some cars had issues and some didnt show up, oh well... Probably gonna try to have the Dyno Night once a month or so, spooledcrxb18 will keep you guys posted im sure.
whoismikeford414 Newbie
Number of posts : 32 Registration date : 2011-09-17
Subject: Re: Rage Tek Dyno Day July 28th 2012, 6:42 pm
V6Chris wrote:
dont even sweat those numbers. Ive seen a dozen 5.0s with bolt ons. your dyno is almost the highest ive seen if those are your numbers.
xpipe, intake, tune and boss intake they avg 408-430whp all the time on the dyno. depends on the trans
Yeah but the curve isn't nearly as good as it was before the boss, before boss I made 430 and 414 ft lb, now I'm making 379, so either the dyno is reading pretty low or I'll be parting ways with this manifold... I'll sacrifice some low end torque for some hp up top, but not 35ft lbs for only 3 hp lol, I know that's not the case because it feels a lot better up top, so I'll be making a trip to bbr soon before I make any decisions, cam tune is gone by the way that got old real quick!
whoismikeford414 Newbie
Number of posts : 32 Registration date : 2011-09-17
Subject: Re: Rage Tek Dyno Day July 28th 2012, 6:47 pm
Phantom SRT4 wrote:
Seems like good numbers for the mods, especially on that dyno... BTW, I was the one talking to you about getting one... Everyone thought you had a cam lol
Yeah that tune was fun for a bit, it's already off the car lol, procharged vette tried racing me cuz of them he thought I was actually fast
Phantom SRT4 STREET KING
Number of posts : 2395 Age : 33 Registration date : 2009-02-14
Subject: Re: Rage Tek Dyno Day July 28th 2012, 6:52 pm
I want to see how the FRPP Cobra Jet 5.0 manifolds do on a bolt on car
whoismikeford414 Newbie
Number of posts : 32 Registration date : 2011-09-17
Subject: Re: Rage Tek Dyno Day July 28th 2012, 7:36 pm
Phantom SRT4 wrote:
I want to see how the FRPP Cobra Jet 5.0 manifolds do on a bolt on car
With that you'd need a new TB and intake, and it's 900+, better be 50+ hp with the set up for anyone to consider it -_-
spooledcrxb18 Newbie
Number of posts : 33 Registration date : 2012-05-27
Subject: Re: Rage Tek Dyno Day July 28th 2012, 9:42 pm
Also remeber that the runs were done with the dyno reading about 93degrees or so...but yea ours reads low regardless, i would go back to bbr to get get accurate gains from the intake mani. If you wanna touch up the tune we can help you out with that if you using diablosport for a tuner. Might be able to maximize the potential of the new mani...
Mr37r Newbie
Number of posts : 26 Location : in my house Registration date : 2009-03-17
Subject: Re: Rage Tek Dyno Day July 29th 2012, 1:48 pm
That dyno is a heart breaker...
Phantom SRT4 STREET KING
Number of posts : 2395 Age : 33 Registration date : 2009-02-14
Subject: Re: Rage Tek Dyno Day July 29th 2012, 2:45 pm
Yea for some reason SRT4s cant make more than 380 on that damn dyno
95RioRedCobra Professional Street Racer
Number of posts : 339 Age : 44 Location : Davie, FL Registration date : 2010-07-26
Subject: Re: Rage Tek Dyno Day July 29th 2012, 3:42 pm
379 on a 5.0 with a boss intake is way off! The Davie PD 5.0 made 431 through an auto. Shit Alberts Steeda intake, tune, catback car made 402.
Phantom SRT4 STREET KING
Number of posts : 2395 Age : 33 Registration date : 2009-02-14
Subject: Re: Rage Tek Dyno Day July 29th 2012, 3:52 pm